| ### Showing:
Annotations
Attributes
Diagrams
Properties
Source

Element VirtualCoverage

Namespace | urn:us:gov:ic:virt
Annotations | The subject-matter coverage of a publication in terms of one or more virtual addresses. May identify the protocol being used and the virtual address of the resource.
Diagram |
Type | VirtualCoverageType
Properties |
content | complex
Attributes |
QName | Type | Use | Annotation
--- | --- | --- | ---
DESVersion | restriction of xsd:string | optional | The version of the DES.
FGIsourceOpen | ismcatfgio:CVEnumISMCATFGIOpen | optional | The set of countries and/or international organizations whose information is derivatively sourced in a document when the source of the information is not concealed (also used for cases when the source is unknown) FGI markings protect foreign-owned or foreign-produced information and are applied based on sharing agreements or arrangements with the source country or organization. This attribute is used at both the resource and the portion levels. The permissible values for this attribute are defined in the ISM FGI Open CVE: CVEnumISMFGIOpen.xml. Note: the value "UNKNOWN" is allowed in cases where the source of the information is not known.
FGIsourceProtected | ismcatfgip:CVEnumISMCATFGIProtected | optional | The set of countries and/or international organizations whose information is derivatively sourced in a document when the source of the information must be concealed This attribute has specific rules concerning its usage: PROTECTED SPACES ? Within protected internal organizational spaces, this attribute may be used to maintain a formal record of the foreign country or countries and/or registered international organization(s) that are the non-disclosable owner(s) and/or producer(s) of information which is categorized as foreign government information according to Security Markings Program guidelines. If the data element is employed in this manner, then additional measures must be taken prior to dissemination of the resource to shared spaces so that any indications of the non-disclosable owner(s) and/or producer(s) of information within the resource are eliminated. In all cases, the corresponding portion marking or banner marking should be compliant with Security Markings Program guidelines for FGI when the source must be concealed. In other words, even if the data element is being employed within protected internal organizational spaces to maintain a formal record of the non-disclosable owner(s) and/or producer(s) within an XML resource, if the resource is rendered for display within the protected internal organizational spaces in any format by a stylesheet or as a result of any other transformation process, then the non-disclosable owner(s) and/or producer(s) should not be included in the corresponding portion marking or banner marking. SHARED SPACES ? Within shared spaces, the data element serves only to indicate the presence of FGI; in this case, this element's value will always be "FGI". The data element may also be employed in this manner within protected internal organizational spaces. Permissible values for this attribute are defined in the ISM FGI Protected CVE: CVEnumISMFGIProtected.xml. Note: the value "FGI" is permitted in the case outlined for "shared spaces".
SARIdentifier | ismsar:CVEnumISMSAR | optional | This attribute is used at both the resource and the portion levels. One or more indicators identifying the defense or intelligence programs for which special access is required. It is manifested in portion marks and security banners. PERMISSIBLE VALUES The permissible values for this attribute are defined in the Controlled Value Enumeration: CVEnumISMSAR.xml
SCIcontrols | ismscicon:CVEnumISMSCIControls | optional | This attribute is used at both the resource and the portion levels. One or more indicators identifying sensitive compartmented information control system(s). It is manifested in portion marks and security banners. PERMISSIBLE VALUES The permissible values for this attribute are defined in the Controlled Value Enumeration: CVEnumISMSCIControls.xml
address | xsd:string | optional |
atomicEnergyMarkings | ismatomic:CVEnumISMatomicEnergyMarkings | optional | Applicable atomic energy information markings for a document or portion This attribute is used at both resource and portion levels. The permissible values for this simple type are defined in the ISM Atomic Energy Markings CVE: CVEnumISMAtomicEnergyMarkings.xml.
classification | ismclassall:CVEnumISMClassificationAll | optional | The highest level of classification applicable to the containing document or portion The Classification element is always used in conjunction with the Owner Producer element. Taken together, the two elements specify the classification category (TS, S, C, R, or U) and the type of classification (US, non-US, or Joint). This attribute is used to render portion marks and security banners. This attribute is used at both resource and portion levels. The permissible values for this simple type are defined in the ISM Classification All CVE: CVEnumISMClassificationAll.xml
classificationReason | restriction of xsd:string | optional | One or more reason indicators or explanatory text describing the basis for an original classification decision This attribute corresponds to the "Reason" line of a document's classification authority block, and it is only used, and only allowed, when classification is the result of an original classification decision. It is used primarily at the resource level.
classifiedBy | restriction of xsd:string | optional | The identity, by name or personal identifier and position title, of the original classification authority for a document This attribute corresponds to the "Classified By" line of a resource's classification authority block. It is used primarily at the resource level.
compilationReason | restriction of xsd:string | optional | The reason that the classification of the document is more restrictive than the simple roll-up of the marked portions of the document This attribute is an indicator that there is not accidental over-classification of the document. Users must exercise special care beyond that indicated by the portion marks when using this information.
cuiBasic | ismcuibasic:CVEnumISMCUIBasic | optional | Applicable CUI Basic markings for a document or portion This attribute is rendered in portion marks and banners. The permissible values for this attribute are defined in the ISM Dissemination CVE: CVEnumISMCUIBasic.xml
cuiControlledBy | restriction of xsd:string | optional | The identity, by name or personal identifier and position title, of the CUI controlling authority for a document containing CUI information This attribute corresponds to the 32-CFR Parts 2002.20(d) requirement that all documents containing CUI must carry an indicator of who designated the CUI within it.
cuiControlledByOffice | restriction of xsd:string | optional | Office in an agency or department that is responsible for labeling and controlling information as CUI. Ref DOD INSTRUCTION 5200.48
cuiDecontrolDate | xsd:date | optional | The specific date when a CUI resource is subject to automatic CUI decontrol procedures This attribute corresponds to the 32-CFR Parts 2002.20(e) requirement that, where feasible, designating agencies must include a specific decontrolling date or event with all CUI.
cuiDecontrolEvent | restriction of xsd:string | optional | A description of an event upon which CUI information shall be subject to automatic decontrol procedures. This attribute corresponds to the 32-CFR Parts 2002.20(e) requirement that, where feasible, designating agencies must include a specific decontrolling date or event with all CUI.
cuiPOC | restriction of xsd:string | optional | Point of Contact for labeling and controlling information as CUI. Ref DOD INSTRUCTION 5200.48
cuiSpecified | ismcuispecified:CVEnumISMCUISpecified | optional | Applicable CUI Specified markings for a document or portion This attribute is rendered in portion marks and banners. The permissible values for this attribute are defined in the ISM Dissemination CVE: CVEnumISMCUISpecified.xml
declassDate | xsd:date | optional | The specific date when the resource is subject to automatic declassification procedures if not properly exempted from automatic declassification This attribute corresponds to the "Declassify On" line of a resource's classification authority block. It is used primarily at the resource level.
declassEvent | restriction of xsd:string | optional | A description of an event upon which the information shall be subject to automatic declassification procedures if not properly exempted from automatic declassification A description of an event upon which the information shall be automatically declassified if not properly exempted from automatic declassification. This attribute corresponds to the "Declassify On" line of a resource's classification authority block. It is used primarily at the resource level.
declassException | ism25x:CVEnumISM25X | optional | The exemption from automatic declassification that is claimed for a document This element is used in conjunction with the Declassification Date or Declassification Event, and it corresponds to the "Declassify On" line of a resource's classification authority block. It is used primarily at the resource level. The permissible values for this attribute are defined in the ISM N25X CVE: CVEnumISMN25X.xml.
derivativelyClassifiedBy | restriction of xsd:string | optional | The identity, by name or personal identifier, of the derivative classification authority This attribute corresponds to the "Classified By" line of a resource's classification authority block, and it is used primarily at the resource level.
derivedFrom | restriction of xsd:string | optional | A citation of the authoritative source or sources of the classification markings used in a derivative classification decision for a classified document This attribute corresponds to the "Derived From" line of a document's classification authority block, and it is used primarily at the resource level. ISOO Guidance: The source of derivative classification. (1) The derivative classifier shall concisely identify the source document or the classification guide on the ''Derived From'' line, including the agency and, where available, the office of origin, and the date of the source or guide. An example might appear as: Derived From: Memo, ''Funding Problems,'' October 20, 2008, Office of Administration, Department of Good Works or Derived From: CG No. 1, Department of Good Works, dated October 20, 2008 (i) When a document is classified derivatively on the basis of more than one source document or classification guide, the ''Derived From'' line shall appear as: Derived From: Multiple Sources (ii) The derivative classifier shall include a listing of the source materials on, or attached to, each derivatively classified document.
displayOnlyTo | ismcatrelto:CVEnumISMCATRelTo | optional | The set of countries and/or international organizations associated with a "Display Only To" marking The "Display Only To" marking indicates that a document is authorized for foreign viewing by appropriate affiliates of approved countries and/or international organizations without providing the foreign recipient with a copy for retention in any medium (physical or electronic). This attribute is used at both the resource and the portion levels. The permissible values for this attribute are defined in the ISM Rel To CVE: CVEnumISMRelTo.xml.
disseminationControls | ismdissem:CVEnumISMDissem | optional | Applicable dissemination control markings for a document or portion This attribute is rendered in portion marks and banners. The permissible values for this attribute are defined in the ISM Dissemination CVE: CVEnumISMDissem.xml
handleViaChannels | xsd:string | optional | Handle VIA Channels that may appear in the second banner line.
hasApproximateMarkings | xsd:boolean | optional | When true, indicates the ISM markings specified are estimated (e.g. system high).
highWaterNATO | ismhighwaternato:CVEnumISMHighWaterNATO | optional | Applicable NATO highwater markings for a document or portion This attribute is rendered in portion marks and banners. The permissible values for this attribute are defined in the ISM HighWater NATO CVE: CVEnumISMHighWaterNATO.xml
joint | xsd:boolean | optional | When true, an indicator that entities in the @ism:ownerProducer attribute are JOINT owners of the data
network | CVEnumVIRTNetworkName | optional | An Internet-Protocol-based computer network. Use this attribute to make explicit the network where the address resides. Specify "other:name" if none of the primary choices apply.
nonICmarkings | ismnonic:CVEnumISMNonIC | optional | One or more indicators of an expansion or limitation on the distribution of a document or portion originating from non-intelligence components This attribute is used at both the resource and the portion levels, and it is rendered in portion marks and security banners. The permissible values for this attribute are defined in the ISM Non-IC CVE: CVEnumISMNonIC.xml
nonUSControls | ismnonus:CVEnumISMNonUSControls | optional | One or more indicators of an expansion or limitation on the distribution of a document or portion originating from non-US components (foreign government or international organization). This attribute is used at both the resource and the portion levels, and it is rendered in portion marks and security banners. The permissible values for this attribute are defined in the ISM Non-US Controls CVE: CVEnumISMNonUSControls.xml
ownerProducer | ismcatownpro:CVEnumISMCATOwnerProducer | optional | The set of national governments and/or international organizations that have purview over the containing classification marking This element is always used in conjunction with the Classification element. Taken together, the two elements specify the classification category (TS, S, C, R, or U) and the type of classification (US, non-US, or Joint). The permissable values for this attribute are defined in the ISMCAT Owner Producer CVE: CVEnumISMCATOwnerProducer.xml.
protocol | xsd:string | optional |
releasableTo | ismcatrelto:CVEnumISMCATRelTo | optional | This attribute is used at both the resource and the portion levels. One or more indicators identifying the country or countries and/or international organization(s) to which classified information may be released based on the determination of an originator in accordance with established foreign disclosure procedures. This element is used in conjunction with the Dissemination Controls element. It is manifested in portion marks and security banners. PERMISSIBLE VALUES The permissible values for this attribute are defined in the Controlled Value Enumeration: CVEnumISMRelTo.xml
secondBannerLine | ismsecondbannerline:CVEnumISMSecondBannerLine | optional | Tokens that contain markings used to support administrative and legal processes for handling and protecting documents. When they appear in a document, these tokens form a second line that is placed below the banner.
Source |
    <xsd:element name="VirtualCoverage" type="VirtualCoverageType">
      <xsd:annotation>
        <xsd:documentation xml:lang="en">
          <p xmlns="http://www.w3.org/1999/xhtml" ism:ownerProducer="USA" ism:classification="U">The subject-matter coverage of a publication in terms of one or more virtual addresses. May identify the protocol being used and the virtual address of the resource.</p>
        </xsd:documentation>
      </xsd:annotation>
    </xsd:element>
Schema location | VIRT.xsd Copy and paste this link to your file browser, clicking the link MAY open in the browser. Opening in an XML aware editor is best.

## This document has been approved for Public Release by the Office of the Director of National Intelligence. See Distribution Notice for details. Click Here